Post by Philip Ayres on Mar 2, 2011 13:34:10 GMT
Reveal The Shield Wreck-Gar
Wreck-Gar's first toy was a motor bike made to tie in with the first Transformers Movie in 1986. We waited Twenty Three years for a new version before Animated Wreck-Gar came out at the start of 2009, brilliantly reincarnating the collector of rubbish as a dust cart. Two years later we have another version of Wreck-Gar out as part of Reveal The Shield d this time we're back to being a motorbike. The new RTS version slims down the bike and makes it much more realistic than the original. The new one is quite high too, making it feel a bit like an off road bike. Both wheels spin freely, but neither is wide enough to support the bike so a fold down stand is supplied on the right side of the bike. The placement of this part will cause some problems later. Neither the front forks or handlebars turn out to the sides. The colours are similar to the originals with lots of brown, sandy brown and grey. The seat on the back of the toy has a nice feature: there's two slots on it which precisely match tabs found sticking down from the waist of Wreck-Gar's robot mode. This allows Wreck-gar, or one of his repaints to ride Wreck-Gar, rein acting the battle on Junkion scene in Transformers The Movie (The proper one!) At the rear of the seat is a single 3mm bar for c-clip weapons. Mine's not terribly well aligned, formed as it is by two parts attached to either side of the saddle.
Transformation: pull the exhaust pipe and attached rear wheel fork half away to the side - they're connected to the other half of the fork by a c-clip that passes between the wheel and the body of the bike. Pull the other half of the fork away from the body then bend the rear wheel up along the right side of the rear of the bike. Pull the saddle back and fold out to become one of the legs. Pop the front of the bike off the front forks and pull up. Push the windscreen & headlight back folding the front mud guard out & turning around to form a foot. Bring the hips together and turn the toy so the saddle form the leg on your right and the windscreen the leg on your left. Turn the upper half of the toy round so the flame & gun barrel side of the chest faces front. Fold the vehicle parts on the robot's back out to the sides to form the arms which are then unfolded. Fold the head up. Unfold the removed fork half and exhaust. Move the blades of the wheel hub at the end to form an axe, similar to the armour axe carried by the original.
Wreck-Gar's robot mode resembles the original, with more than a hint of the differences shown in his original design drawings. The head *looks* like it's shaped from the front of the bike, but isn't, that's ended up on his right ankle. The eyes are a clear lightpipe from the windscreen on the head, with the the eye end tinted red. The chest is a much more angled version of the original with added flame detail and the guns poking out in a position that I'm trying not to talk about. The original Hasbro publicity photos shows Wreck-Gar with a red chest but the version I have here is the same brown used elsewhere on the toy. His articulation isn't bad: turning wrists, bending elbows, bicep swivel, ball jointed shoulder although his left one is a bit of a problem as his left upper arm has the front wheel attached to it but the body side of the joint has the stand attached to it meaning they have a habit of meeting each other. It wouldn't of been too hard to make either part attach to the other side of the toy. The head is ball jointed, the waist turns, both hips are ball jointed, the knees bend but watch the transformation joint on his right leg that's near the knee and the ankles are on ball joints. Unfortunately, like RTS Optimus Prime, he suffers from plastic stress both on the palms of his hands and on the top of the ball joints for the shoulders, which have a pin passed through them to strengthen them. This is putting me off the open style of hand that's becoming common recently and I'm hoping the closed fists make a come back soon. The robot mode features three 3mm bars: one on his left ankle, one on his left knee and another on his back which can be used to store his weapon.
Overall: I like the toy in both modes but the stress mark issue brings it down a bit. Transforming back to vehicle mode can be a bit of a pig too!
Reveal The Shield Wreck-Gar was released in the US in January 2011 and in the UK a month later. If you're looking for one in the UK then visit Toys R Us, which, at time of writing (02/03/2011) is receiving them and pricing the toys at £9.97.
For more pictures see these Blog entries showing United & RTS Wreck-Gar and various toys riding Wreck-Gar
Transformers United Wreck-Gar
The Blog entry linked above has some wonderful comparison images of the two different versions of Wreck-Gar. Broadly similar in vehicle mode, the RTS Version has a sandy seat mount and brown windscreen mount while these paint colours are reversed on the United version. In robot mode United Wreck-Gar loose the flames on the chest and paints it red, with the grey of his right shoulder, waist and upper legs becoming a sandy colour. The differences aren't quite enough to make them into two different Junkion characters though.
Wreck-Gar was released in late February 2011 as Transformers United toy UN-18 alongside UN-15 Perceptor, UN-16 Blur & UN-17 Kup.
E-Hobby Junkion
Late in 2010 E-Hobby announces a pair of three packs featuring the Henkei/Transformers United versions Autobots and Decepticons from the 1986 Transformers Movie. The Autobot set consists of a slightly recoloured & battle damaged Kup, a clear blue Hot Rod, supposedly from the scene where Hot-Rod catches the Matrix in the Autobot sick bay, and a new Junkion character, as yet unnmamed. The bike mode is a darker brown with some more silvery grey while the dark brown on the robot mode moves to the hands, chest and lower legs, with red upper arms and waist and most of the rest silver. A new head, featuring a face plate and no handle bars is also included.
More Junkions are good. *REALLY* tempted by these two sets.
Generations Junkion Scrap Heap
Reveal The Shield Wreck-Gar's instructions show a second new head, this time with visored eyes and a visible face which will become Wreck-Gar's Generations repaint. At time of writing we don't know colours or the name for certain, though I have heard this toy referred to as "Scrap Heap", so we'll call it that until we find out otherwise!
Future Repaints
White and Pink with a new head as Arcee please!
Wreck-Gar's first toy was a motor bike made to tie in with the first Transformers Movie in 1986. We waited Twenty Three years for a new version before Animated Wreck-Gar came out at the start of 2009, brilliantly reincarnating the collector of rubbish as a dust cart. Two years later we have another version of Wreck-Gar out as part of Reveal The Shield d this time we're back to being a motorbike. The new RTS version slims down the bike and makes it much more realistic than the original. The new one is quite high too, making it feel a bit like an off road bike. Both wheels spin freely, but neither is wide enough to support the bike so a fold down stand is supplied on the right side of the bike. The placement of this part will cause some problems later. Neither the front forks or handlebars turn out to the sides. The colours are similar to the originals with lots of brown, sandy brown and grey. The seat on the back of the toy has a nice feature: there's two slots on it which precisely match tabs found sticking down from the waist of Wreck-Gar's robot mode. This allows Wreck-gar, or one of his repaints to ride Wreck-Gar, rein acting the battle on Junkion scene in Transformers The Movie (The proper one!) At the rear of the seat is a single 3mm bar for c-clip weapons. Mine's not terribly well aligned, formed as it is by two parts attached to either side of the saddle.
Transformation: pull the exhaust pipe and attached rear wheel fork half away to the side - they're connected to the other half of the fork by a c-clip that passes between the wheel and the body of the bike. Pull the other half of the fork away from the body then bend the rear wheel up along the right side of the rear of the bike. Pull the saddle back and fold out to become one of the legs. Pop the front of the bike off the front forks and pull up. Push the windscreen & headlight back folding the front mud guard out & turning around to form a foot. Bring the hips together and turn the toy so the saddle form the leg on your right and the windscreen the leg on your left. Turn the upper half of the toy round so the flame & gun barrel side of the chest faces front. Fold the vehicle parts on the robot's back out to the sides to form the arms which are then unfolded. Fold the head up. Unfold the removed fork half and exhaust. Move the blades of the wheel hub at the end to form an axe, similar to the armour axe carried by the original.
Wreck-Gar's robot mode resembles the original, with more than a hint of the differences shown in his original design drawings. The head *looks* like it's shaped from the front of the bike, but isn't, that's ended up on his right ankle. The eyes are a clear lightpipe from the windscreen on the head, with the the eye end tinted red. The chest is a much more angled version of the original with added flame detail and the guns poking out in a position that I'm trying not to talk about. The original Hasbro publicity photos shows Wreck-Gar with a red chest but the version I have here is the same brown used elsewhere on the toy. His articulation isn't bad: turning wrists, bending elbows, bicep swivel, ball jointed shoulder although his left one is a bit of a problem as his left upper arm has the front wheel attached to it but the body side of the joint has the stand attached to it meaning they have a habit of meeting each other. It wouldn't of been too hard to make either part attach to the other side of the toy. The head is ball jointed, the waist turns, both hips are ball jointed, the knees bend but watch the transformation joint on his right leg that's near the knee and the ankles are on ball joints. Unfortunately, like RTS Optimus Prime, he suffers from plastic stress both on the palms of his hands and on the top of the ball joints for the shoulders, which have a pin passed through them to strengthen them. This is putting me off the open style of hand that's becoming common recently and I'm hoping the closed fists make a come back soon. The robot mode features three 3mm bars: one on his left ankle, one on his left knee and another on his back which can be used to store his weapon.
Overall: I like the toy in both modes but the stress mark issue brings it down a bit. Transforming back to vehicle mode can be a bit of a pig too!
Reveal The Shield Wreck-Gar was released in the US in January 2011 and in the UK a month later. If you're looking for one in the UK then visit Toys R Us, which, at time of writing (02/03/2011) is receiving them and pricing the toys at £9.97.
For more pictures see these Blog entries showing United & RTS Wreck-Gar and various toys riding Wreck-Gar
Transformers United Wreck-Gar
The Blog entry linked above has some wonderful comparison images of the two different versions of Wreck-Gar. Broadly similar in vehicle mode, the RTS Version has a sandy seat mount and brown windscreen mount while these paint colours are reversed on the United version. In robot mode United Wreck-Gar loose the flames on the chest and paints it red, with the grey of his right shoulder, waist and upper legs becoming a sandy colour. The differences aren't quite enough to make them into two different Junkion characters though.
Wreck-Gar was released in late February 2011 as Transformers United toy UN-18 alongside UN-15 Perceptor, UN-16 Blur & UN-17 Kup.
E-Hobby Junkion
Late in 2010 E-Hobby announces a pair of three packs featuring the Henkei/Transformers United versions Autobots and Decepticons from the 1986 Transformers Movie. The Autobot set consists of a slightly recoloured & battle damaged Kup, a clear blue Hot Rod, supposedly from the scene where Hot-Rod catches the Matrix in the Autobot sick bay, and a new Junkion character, as yet unnmamed. The bike mode is a darker brown with some more silvery grey while the dark brown on the robot mode moves to the hands, chest and lower legs, with red upper arms and waist and most of the rest silver. A new head, featuring a face plate and no handle bars is also included.
More Junkions are good. *REALLY* tempted by these two sets.
Generations Junkion Scrap Heap
Reveal The Shield Wreck-Gar's instructions show a second new head, this time with visored eyes and a visible face which will become Wreck-Gar's Generations repaint. At time of writing we don't know colours or the name for certain, though I have heard this toy referred to as "Scrap Heap", so we'll call it that until we find out otherwise!
Future Repaints
White and Pink with a new head as Arcee please!
